Cast iron platforms not only need to meet various requirements during production, but also after being finished, they need to meet many requirements. Otherwise, it will also affect their performance. So, what kind of requirements do these finished products need to meet? Firstly, when it comes to sand removal, it must meet the requirements. For the bottom surface of this platform, it needs to be clean and spray painted on shallow plows. Generally, rust proof paint is chosen for the type of paint, and the color is mostly red.

For the side of the cast iron platform, attention should also be paid to making it flat before painting. In this regard, the color is generally green or blue human paint. In addition to meeting the requirements for sand cleaning and painting, it is also important to ensure that it meets the packaging requirements. Even if it is a well produced platform, if it does not meet the requirements on the packaging, it often affects its performance. Generally, wooden packaging is used on the packaging, and thick wood should be selected to cover the working surface of the platform.

And when packaging, it is also necessary to do a good job of rust prevention, because after packaging, there will be time before use. If the cast iron platform rusts during this period, it will not only be troublesome, but also relatively reduce its performance during use. One thing is that a finished product will be transported, because the platform is not as good as other products. Therefore, when transporting it, the first thing to pay attention to is not to let it hang in the air, and try to avoid its vibration as much as possible. It should not be stacked too high, which can easily cause it to deform.

After using cast iron plates for a period of time, they often experience wear and tear, which can have an impact on the production of work. At this time, how should we improve their accuracy? There are many methods among them, and in fact, the most commonly used method is to achieve the effect of checking the plane by coloring. If you want to check it, you first need to know where it is uneven, and at this time, this method can achieve good inspection results.

The inspection method of using this cast iron flat plate, also known as the coloring method, has shown many advantages. One is that it can achieve good accuracy and intuitiveness. As we all know, there are other methods that can also be used to inspect flat surfaces. However, when using it, it often cannot achieve a very intuitive effect, so it cannot be carried out. Moreover, this method also has its own convenience.